Deluxe Custom Guitar in Butterscotch 25-1/2″ Scale with Block Inlay and New SRV Pickups Chrome Hardware plus Treble-Bleed Circuit Installed. Gig Ready Setup Included!
Custom Maple Deluxe + Ebony/Maple 22 fret Neck with Block Inlay Neck description: ’59 Roundback Neck: Similar to: 1959 Gibson® Les Paul®neck Thickness at 1st Fret: .860″
Fender and Warmoth Necks will fit perfectly. This is a perfect guitar for extended technique.
Deluxe Custom Guitar by Haywire Custom Guitars
“Building satisfied players one Haywire Custom guitar at a time!” Great Tone and Sustain with lots of resonance.
Deluxe Custom Guitar Includes: Treble Bleed Circuit featuring Neck and Bridge SRV Pickups.
Buyers please note: All electronics and hardware have been added free of charge.
Excellent Condition! Start your new guitar project now. If you desire to modify this guitar, remember this is for experienced parts assemblers only. This guitar is ready to Play!
Variable Treble Bleed Circuit included: This mod keeps the tone you have on “10” throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to keep the highs from leaving your tone as the volume is decreased.
By adding this circuit, we can help you avoid the “muddy-tone” syndrome.
Now your tone is much more controllable and articulate!
When the Treble Bleed Circuit is included:
Turning the volume control applies varying amounts of a specially tuned high frequency filter to the selected pickups. Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise. This variable treble bleed circuit is pre-installed. This variable treble bleed/bypass circuit corrects the problem of high frequency losses, provides auto-adjustment of tone at reduced volumes and improves audio taper between 1 and 10.
Black Pick Guard & 3 Way Switching with 6 Saddle Bridge with String-through body Haywire SRV Bridge pickup:
It has a fat, rich bottom, with strong, clear mids. The Treble Bleed Option Already Completed in this guitar! Customized and modified by: Haywire Custom Guitars Inc. Instruments for Professionals Call or write with any questions you may have:
Haywire Custom Guitars Haywire Guitar Custom Guitars-Home of the “Gig Ready” Guitar! This Guitar comes with one year warranty on our workmanship from Haywire Custom Guitars. This Guitar features:
2 New SRV Pickups + Treble Bleed Circuit and Ebony/Maple 22 fret Neck with Block Inlay position markers!
Great for fat clean tone or harder driving rock with more grind
Neck and bridge pickups will be equal, or bridge slightly hotter when playing single notes. Neck Pickup for Warmth with exceptional definition for any chord voicing and great presence for coming through a mix. A Treble Bleed modification ADDED allows you to roll off your volume without losing the highs. Would you like being able to use the volume control… without sacrificing tone? Now You Can… with a Treble Bleed Circuit Mod added on this guitar!
As you turn your guitar’s volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an “edge” on it to a discerning ear.
Avoid this by using our: Haywire Treble Bleed Circuit
It prevents the treble frequencies from bleeding off. It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a TB Circuit capacitor. We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed.
Get more uniform tone from 1 to 10, and a more rounded sound at low volume. THE NECK is a 22 Fret Custom Ebony/Maple Neck. The neck profile is styled after the Les Paul 1959 Roundback59 Round back Similar to: 1959 Gibson® Les Paul®neck Thickness at 1st Fret: .860″Thickness at 12th Fret: .960″The 59 Round back is based on early Les Paul® neck dimensions. It is also the neck profile most similar to the PRS® neck shape. This Guitar Neck Fingerboard Radius is 12″The fingerboard, or playing surface of the guitar neck, usually has a curved radius across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. Musical Style… the fingerboard radius must also allow you to play the style of music you prefer. Installed is a Custom Maple with Block Inlay’59 Round back Profile neck. Note disclaimer: Assemblers and Modifiers please when substituting your own necks: Be ready to make any adjustments necessary to make your project work with any necks and any necessary adjustments to make your neck and body fit together well. It takes skill it’s not co-incidence.
If you know what you’re doing this is easy. If you don’t-then leave this page. You can also write or call us prior to your purchase and ask any questions you’d like which may help you in the assembly process.