Nashville Deluxe Tremolo+SRV’s+B Style Tremolo+Humbucker Pickup+Custom Neck + 5 Way Switching
This Guitar listed, upgraded, customized and modified by: Haywire Custom Guitars
Inc. Instruments for Professionals Call or write with any questions you may have:
Haywire Custom Guitars Home of the “Gig Ready” Guitar!
Instruments for Professionals We Ship World Wide!
Custom Shop Modified Fender GLOSS BLACK Deluxe Style Body
+ New Gloss finish +Custom Neck
+ Comfort Cut Rear Body contour
+ New-Special Neck P.A.F. Humbucker and SRV Middle and Bridge pickups! Our design, SRV’s wound in New York for Haywire Custom Guitars Inc.
Go from Growl to very articulate quickly with extreme clarity.
B Style Tremolo System
Custom 25.5 in. scale neck installed THE Guitar NECK: ’59 Round back The neck is styled after the Les Paul 1959 Round back
Similar to: 1959 Gibson® Les Paul®Thickness at 1st Fret: .860″Thickness at 12th Fret: .960″The ’59 Round back is based on early Les Paul® neck dimensions. It is also the neck profile most similar to the PRS® neck shape.
+all frets leveled and re-crowned fret ends dressed for a broken in feel
Fret size: Dunlop 6150 Nut width: 1-11/16
Haywire Custom Shop All Maple Neck includes:
New Tuners, Nut, Strings and Full Set-Up with Low action and intonation and Tremolo set just right
Nashville Deluxe Tremolo
Variable Treble Bleed Circuit included:
This mod keeps the tone you have on “10” throughout the entire range of the volume control.
We add a resistor capacitor network to the input and output of the volume control to
keep the highs from leaving your tone as the volume is decreased.
By adding this circuit we can help you avoid the “muddy-tone” syndrome.
Now your tone is much more controllable and articulate!
Variable tone treble Bleed circuit has been installed for you.
The Haywire Treble Bleed Circuit is included:
The Treble Bleed is hand-soldered here in our shop: between the input and output lugs of your guitar volume control pot, to smooth out treble bleed.
Get uniform tone from 1 to 10, and a more rounded and concise audio at low volume.
Turning the volume control applies varying amounts of a specially tuned high frequency filter to ALL pickups.
Now each pickup has the ability to produce a stronger, fuller tone and 50% less noise.
This Nashville Deluxe Tremolo has a variable treble bleed circuit is now installed
This variable treble bleed/bypass circuit corrects the problem of high frequency losses provides auto-adjustment of tone at reduced volumes and improves audio taper between 3 and 10. Featuring: specially voiced selected
custom guitar pickups that deliver masterful tone, overdrive,
clarity, dynamics, transparency, with versatility & balanced tonal response.
Black Pick Guard, 3-way switching and 6 Saddle T-O-M Bridge with an SRV Bridge Pickup
It has a fat, rich bottom, with strong clear mids
New SRV Bridge Pickup Added+
New! P.A.F. Humbucker Neck Pickup Added
Guitar Description **Nashville Deluxe Tremolo with New Electronics** Custom finished Guitar…..Professional Setup American Deluxe body and Custom Shop Neck With Humbucker Neck Pickup
This Nashville Deluxe Tremolo Body is **Ash**
Note: about the electronics-they’re included free:
All hardware, pickups,strap knobs, electronics, 3 way switch :
INCLUDED and installed on body at NO CHARGE
Customized and modified by: Haywire Custom Guitars
Inc. Instruments for Professionals
Call or write with any questions you may have:
Haywire Custom Guitars Home of the “Gig Ready” Guitar! This Guitar body comes with one year warranty on our workmanship from Haywire Custom Guitars.
This Guitar features:
2 New SRV Pickups and One New Humbucker, new electronics and new finish! SRV-Bridge and Neck Tele Pickups are installed for fat clean tone or harder driving rock with more grind.
Neck and bridge will be equal, or bridge slightly hotter when playing single notes. Humbucker Neck Pickup for Warmth with exceptional definition for any chord voicing and great presence for coming through a mix
A Treble Bleed modification has been ADDED.
It allows you allows you to roll off your volume without losing the highs. Would you like being able to use the volume control… without sacrificing tone? Now You Can… with a Treble Bleed Circuit Mod added on this guitar!
As you turn your guitar’s volume down, the pot allows some of the current to go to ground as opposed to the output.
The frequencies that leave first are the highs, which leave the tone muddy and obscured without an “edge” on it to a discerning ear.
Avoid this by using our:
Haywire Treble Bleed Circuit
This circuit is now installed in this Nashville Deluxe Tremolo
You’ll now have uniform tone from 1 to 10, and a more rounded sound at low volume.
It prevents the treble frequencies from bleeding off.
It allows the treble frequencies to be re-introduced into the output for clarity and improved timbre.
At Haywire we simply install a Treble Bleed Circuit capacitor.
We build them in our custom guitars for a better Low and High sound spectrum:
1-error-correction of signals with enhanced clarity
2- preserve high end frequencies
3-improved taper when rolling back your volume control
Get more uniform tone from 1 to 10, and a more rounded sound at low volume.This Guitar Neck
Fingerboard Radius is 12′”
Nashville Deluxe Tremolo
The fingerboard, or playing surface of the guitar neck, is usually curved or radiused across its width. The purpose of this radius is to accommodate the natural ergonomic shape of your fingers when they are in playing position. Comfort is certainly a major factor in selecting a fingerboard radius but it is not the only factor. Musical Style… the fingerboard radius must also allow you to play the style of music you prefer. However-If you’d like to send us your OWN neck, we’ll add it with: strings, set it up, set truss rod, action and intonation.
Then we’ll pay additional weight and size surcharges and return the whole guitar back to you for 89 bucks gig ready!
All hardware, pickups, strap knobs, electronics, switch:
INCLUDED and installed on body: No Charge.
The Neck Pick-Up specs:
Humbucker Neck Pickup:
DC Resistance: 12.80K
The Bridge and Saddles
6 Saddle T-O-M Bridge
See more about our: services, guitars and models on the Haywire Website
Haywire Custom Guitars Inc. We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design. Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments.
If you feel that you don’t have the skill in working with wood or guitar mods-please don’t feel bad, instead-send us your project parts, we can do it, and we’ll finish it for you.
However, you can also write or call us prior to your purchase and ask any questions you’d like. OR………….Send us your neck or body with your favorite strings and we’ll mount the neck on it for you for just $45 plus return shipping.
This is an excellent instrument for a serious player. If you take your playing seriously then take a great guitar to the gig with you. This instrument is very sweet and will serve you, the professional player, for many years to come.
You practice hard and you work hard on your playing! So… get a great tool to work with!
No roadblocks to your success as a guitarist!
write with any questions you may have:
Instruments for Professionals
We Ship World Wide!
We Ship World Wide!
Haywire Custom Guitars 8-point gig ready guitar process…
1. The 4-axis Alignment of the guitar neck. Each guitar neck is checked and adjusted to ensure that it is true and straight to insure proper alignment on all axis. This step ensures proper action and allows for more accurate and easier guitar tuning, playing and set-up in the following steps.
2. Inspect and Lube the guitar tuning gears. Before installing the guitar tuning gears, each one is checked thoroughly. Each tuning gear is adjusted-there is no play in the mechanism. They are then lubricated to insure smooth and even movement to make your guitar tune accurately.
3. Potting the guitar pickups-We dip the pickups in hot wax to reduce squeal and unwanted guitar feedback
4. Prep the guitar body-Before installing the guitar electronic components, great care is taken to ensure that all wires are properly routed, spaced, and grounded to insure years of trouble-free service with your guitar5. Level and polish the frets. All of the guitar frets are level, eliminating any possibility of fret buzz due to unevenness.
6. Radius the guitar strings-Most guitar necks have a contour over the top of the neck. We adjust the strings to make sure that height of each string follows the contour of the guitar neck.7. Adjusting the overall guitar string height and the action. Once we set the contour and radius of the guitar strings, then to adjust the overall height of the strings from the top of the frets to the bottom of the strings.
8. Set the guitar intonation-This step is done twice. The intonation is set two times with a 24-hour seat-in period in between to allow the guitar to properly re-seat to the new adjustments.
Haywire Custom Guitars is a unique Custom Shop of craftsman where we modify guitars from many manufacturers. We alter instruments to individual or personal specifications and offer the resulting upgraded instruments for sale. We are not a Gibson, Epiphone, Washburn, Wilkinson, Parker, Carvin, BC Rich USA, Jackson, PRS, Ernie Ball, Warmoth or Fender dealer nor are we affiliated with any of these companies. We do however buy used guitars from various manufacturers, new and used instruments from private individuals that we re-build, re-shape, re-sand, re-finish, re-top and customize ourselves for customers upon request. We upgrade electronics, necks, hardware and finishes and offer the finished products for sale. While there are no manufacturer warranties on the instruments we sell. We do however offer our own warranty for one year on our hand-crafted finished products and craftsmanship on our finishing, customization and 8 point “Gig Ready” Haywire set-up processes.