Loaded Solid White “Mahogany” Double-Cutaway Classic Guitar Body with Beautiful “NEW” White Finish and SRV Pickups + New Hardware
Loaded Solid Mahogany finished in White Guitar Body: plus Pick guard, SRV Pickups, Tremolo bridge + Volume + 2 Tone Controls, strap knobs, screws, input jack, all wiring and back plate added free of charge.
“Building satisfied players one Haywire Custom guitar at a time!”
* Great Tone and Sustain * Guitar Description: Solid light grained Honduran Mahogany wood with lots of resonance. By: Haywire Custom Shop USA-South Carolina
Solid “Mahogany” Classic White Guitar Body with beautiful “NEW” white finish and Sky Blue Guard: 5.5 lbs.
This Guitar body includes all NEW: Hardware, Noiseless SRV Pickups
Sky Blue Pick guard, New Jack, Knobs + New electronics, Neck plate and Strap Knobs and Screws included.
5-Way Switch pickup selections:
position 1 Bridge pickup alone
position 2 bridge + middle pickup in parallel
position 3 middle pickup alone
position 4 middle + neck pickup in parallel
position 5 neck pickup alone
Specifications: White Guitar Body
- Body Wood: Solid Honduran Mahogany
- Weight: 5.5 lbs.
- Finish: White (with polyurethane clear coat)
- Scale Length: 25-1/2″ (648mm)
- Body Thickness: Standard 1-3/4″ (45mm)
- Neck Pocket Size: 2-3/16″ (55.55mm) Width x 3″(76.2mm) Length x 5/8″(15.88mm) Depth
- Neck Mounting Hole Dimension: standard 51mm x 38mm
- Neck mounting holes and wire path are drilled already.
- Body routed for HSH configuration, which is able to accept universal pickup settings and various pick guard styles with different cutouts.
- The body underneath the pick guard is the part of the guitar that is routed. this body is routed for HSH configuration, and able to accept universal pickup choices and various pick guard styles with different cutouts. For example, if you want a S-S-H, or H-S-S, S-S-S, H-H and S-H configurations. The body rout already cut, will accommodate all of these configs. All that is necessary is to decide which pickup configuration you’ll need, then add the pickups to your guard to accommodate the pickup selection YOU need. Then drop back into you guitar with 3 perfectly fitting pickup slots.
- For Pick-Ups the ohms are: Special Strat Bridge Pickup:
DC Resistance: 8.10K – 8.23KSpecial Strat RWRP Middle Pickup:
DC Resistance: 7.58KSpecial Strat Neck Pickup:
DC Resistance: 7.04K
Remember, this is a DIY project body built to American Standard specifications. They alternately, have a 1-2 mm tolerance. If you are intending to use this project with a specific build it is your responsibility to make sure your parts will work with this body before purchasing. Guitar building not “plug-and-play”, it requires an experienced luthier or builder’s knowledge and proper tools. If your parts do not fit, address the issue by working them. If you can source compatible parts, do it or ask us to finish it for you. We can do it with a 1 day turnaround time. Send us a message before buying if you have any questions and we’ll do all we can to assist.
Be ready to make any adjustments necessary to make your project work with any modification that you want to make. Prepare every project as required and necessary. Know the correct adjustments that make your guitar neck and body fit together well. If you know what you’re doing it’s easy. If you don’t-use it as a learning experience and learn. We all started with the first project.
A NECK Send us your neck (or you can buy one of ours for $135 and up: includes setup, fret level, fret dressing, intonation set, strings, action set and tuners), we’ll add strings, set it up, set truss rod, action and intonation.
Then we’ll pay additional weight and size surcharges and return the whole guitar back to you
for 89 bucks gig ready!
plus cost of neck if we supply it.
All hardware, pickups,strap knobs, electronics, switch :
INCLUDED and installed on body: No Charge.Pix, info, custom work, artwork, setup and Design by:
Haywire Custom GuitarsThis is a Custom Shop Re-Finished SRV Special… This solid classic guitar body is very sweet! It is a very “live” sounding body.
All controls and pots, switches are new with **NEW Hardware**. The SRV pick ups are built for tone and longevity. They are slightly hotter than stock. They are similar to Fender stock pick ups but wound hotter for better sustain and they are quiet. For our European Players-These Pick Ups are RoHS Compliant. They have even pole pieces for reliable tone.
Every guitar player is different and so are his/her hands. It is not a “one size fits all” world. Because of this there is no perfect guitar neck shape for everyone. Your neck profile should make it easy for you to comfortably reach all the frets. Bottom line: Neck profile and neck width can be important; so pay attention to what feels right for you so WE can get it right for you because ONLY YOU know what feels right for you. At Haywire Custom Shop our job is to have the right guitar matched up with the right hands. We’re, “musicians working for musicians”. We are experts in the area of Custom Guitar setup, installation, repair, neck fretting, neck refinishing, neck fitting, alignment, and action adjustment and neck design. Assemblers NOTE when substituting your own necks: Be ready to make any adjustments necessary to make your project work with any necks and any necessary adjustments to make your neck and body fit together well. It takes skill it’s not co-incidence. If you know what you’re doing this is easy. If you don’t-then leave this page. Remember to place your neck in the body you intend to use and drill holes in the neck so they will line up with this body. It may require you to do some work in the form of plugging some neck holes. Some of you know that and we know that. The rest of you roll up your sleeves and don’t complain. Most craftsmen realize- every neck may not fit every body as well as every body will not suit every neck. Sometimes holes will line up and sometimes they won’t-so again, make sure you drill your OWN holes in your neck and plug any existing ones. Clamp and align prior to drilling neck holes. If you need to plug some holes then-by all means-do it. We cannot be responsible for careless installation so-be sure you’re competent before you buy anything requiring skills to assemble. If you’re gonna “Do it yourself” then do it. We are aware that there are some differences between bodies and necks. They are not all identical. A small space in the neck pocket however will not affect the play-ability setup, neck installation or action adjustments. Fender often times uses shims in the pockets because of that reason. There should be some space to move the neck right or left when adding a neck so as to get the margins even on the right and left sides of the fret board. There is always craftsmanship involved with building and modifying guitars. Be ready to make any adjustments necessary to make your project work with any necks and make the necessary adjustments. If you feel that you don’t have the skill in working with wood or guitar mods-please don’t feel bad, instead-send us your project parts, we can do it, and we’ll finish it for you. Necks: may require fret leveling and polish, and may need to be fine tuned to fit your instrument. This is normal and not a defect. All necks should be carefully inspected prior to installation and/or modification. All wood is unique with individual growth patterns. However you can also write or call us prior to your purchase and ask any questions you’d like. Send us your neck with your favorite strings and we’ll mount the neck on it for you for just $89.Our bodies and necks are Luthier (trained pro instrument builder) parts only and not meant for, parts changers, DIY’s, beginning, intermediate and hobbyist builders. You can’t do it. Don’t try and modify or assemble these guitar parts yourself. Let a Pro handle it. Please do not purchase if you’re not a Pro luthier in business building instruments. Pro luthier note: only by these with the intention of finishing the project. May only be purchased by a pro builder or luthier. Purchase and payment for this body indicates that you have read and understand this and you’re a Pro. It also means there is no return. Businesses only. Thanks for your understanding. Sometimes we use stock photos however the grain pattern is the only difference in our bodies and necks. White bodies as well all basically look the same so, unless there is damage to a specific part of it, we’ll use the stock photos.
At Haywire Custom Guitars we offer: Acoustic and Electric guitars and… Truss rod adjustments, Guitar Tune-ups, Repairs on electric and acoustic guitars, New guitar pickups, Guitar pickup coil tap switches installed, Treble Bleed circuits for your guitar, Electronics repair, Guitar Neck Shaving and straightening, Guitar neck Re-fretting and fret leveling, Guitar fret re-crowning, Fret polishing, Replacement tuners, add locking tuners, Light weight guitars, lightweight replacement parts, Intonation settings, Adding guitar strings, Re-building your guitar, Modify your Guitars, lower action on guitars, Guitar finishes, Refurbished guitars, Heavy body replacements with light ones, Replace old guitar bodies with new ones, Adjustments while you wait, Custom guitar knob placement, custom pots and capacitors, Great playing used and new guitars, Custom built guitars, Guitar trade-ins, Guitar neck straightening, Guitar neck replacement, Guitar neck reshaping, thinning or shaving a guitar neck, re-profiling your guitar neck. Guitar Modifications for Better Playing Speed and Comfort Part-2Shaping and duplicating guitar necks, Recessed neck heel for ease of playing guitar, new controls added, pan and blender controls added, rewiring guitar pickups and many more services.